Rack power & thermal monitoring
Build monitoring and control paths around DC power rails, temperature sensors and equipment fans.
Component building blocks
Functional blocks for selection; device connections and component values depend on your design.
Current monitoring
Amplify the voltage across a current-sense resistor. Check input common-mode range, gain and error budget.
Temperature monitoring
Read equipment temperature using the handbook-listed temperature sensor. Verify the sensing arrangement and interface in the device documentation.
Brushless motor control
Use the brushless DC controller and its speed-feedback adapter to build a motor control loop. These control devices require an appropriate external power stage.
Analog data acquisition
Digitize analog signals using the channel count, resolution, sample rate and interface recorded for each ADC.
Electrical parameters & cross references
All handbook parameters for the components shown above. Scroll each table horizontally to view every column.
Current-sense Amplifiers
| BI Part Number | Cross Reference | Function | Supply voltage (V) | Input offset voltage (µV) | Input bias current (nA) | Supply current (mA) | Common-mode voltage (V) | Gain (V/V) | Package |
|---|---|---|---|---|---|---|---|---|---|
| BICM193 | INA193 | Current-sense amplifier | 18 | 500 | 210000 | 1 | 0–70 | 20 | SOT23-5 |
| BICM194 | INA194 | Current-sense amplifier with 50× gain | 18 | 500 | 210000 | 1 | 0–70 | 50 | SOT23-5/6 |
Temperature Sensors
| BI Part Number | Cross Reference | Function | Supply voltage (V) | Input voltage (V) | Operating current (mA) | Quiescent current (mA) | Temperature error (°C) | Package |
|---|---|---|---|---|---|---|---|---|
| BI423 | TMP423 | Temperature Sensors | 2.7–5.5 | 2.7–5.5 | 0.038 | 0.01 | ±1.5°C | SOP-8 |
Motor Drivers
| BI Part Number | Cross Reference | Function | Motor type | Supply voltage (V) | Output current (A) | Core functions | Package |
|---|---|---|---|---|---|---|---|
| BIW33035PMC | MC33035 | Motor Drivers | Brushless DC | ~40V | 100mA(peak drive current) | Three- or four-phase brushless DC motor control; H-bridge drive, rotor-position decoder, temperature-compensated reference and Hall-sensor feedback. | SOP-24 |
| BIW33039PMC | MC33035 | Motor Drivers | Brushless DC | 5.5–9 | 20mA(control signal) | Closed-loop speed-control adapter providing speed feedback; used with a controller such as BIW33035PMC. | SOP-8 |
Analog-to-digital Converters
Selection based on documented BI component functions. Cross references are comparison aids and do not establish drop-in compatibility or transfer another manufacturer’s qualification.