Electric-drive measurement
Explore rotor-position conversion and isolated electrical measurements around an electric-drive controller.
Component building blocks
Functional blocks for selection; device connections and component values depend on your design.
Rotor-position conversion
Convert resolver signals into digital position data for a control loop.
Isolated current and voltage sensing
Measure shunt-current or divided-voltage signals across an isolation boundary using the corresponding amplifier function.
Analog data acquisition
Digitize analog signals using the channel count, resolution, sample rate and interface recorded for each ADC.
Electrical parameters & cross references
All handbook parameters for the components shown above. Scroll each table horizontally to view every column.
Resolver-to-digital Converters
| BI Part Number | Cross Reference | Function | Supply voltage (V) | Interface | Resolution (bits) | Tracking rate (rps) | Package |
|---|---|---|---|---|---|---|---|
| BI2S1210 | AD2S1210 | Resolver-to-digital Converters | 5 | Parallel+SPI | 10/12/14/16 | 3125 | LQFP48 |
Isolated Amplifiers
| BI Part Number | Cross Reference | Function | Supply voltage (V) | Input current (mA) | Input voltage (V) | Initial fixed gain | Analog output voltage | Analog input voltage | Common-mode transient immunity (kV/µs) | Package |
|---|---|---|---|---|---|---|---|---|---|---|
| BIGF1300PM | AMC1300 | Isolated current sensing | -0.5–6.5 | ±10 | (GND1−6) V to 6.5 V | 8.2 | (GND2−0.5) V to (VDD2+0.5) V | — | — | SOIC8 (wide body) |
| BIGF1311PM | AMC1311 | Isolated voltage sensing | -0.3–6.5 | ±10 | — | 1 | — | (GND1−6) V to (VDD1+0.5) V | ±150 | WB-SOIC-8 |
Analog-to-digital Converters
Selection based on documented BI component functions. Cross references are comparison aids and do not establish drop-in compatibility or transfer another manufacturer’s qualification.